產品列表PRODUCTS LIST
如下為我司愛澤工業IZE_Industries本月到貨AIR-LOGIC相關產品，歡迎致電索取樣本資料和產品信息。
AIR-LOGIC節流孔
AIR-LOGIC節流孔F-2815-051-B80 AIR-LOGIC節流孔F-2815-071-B80
AIR-LOGIC節流孔F-2815-201-B80 AIR-LOGIC節流孔F-2815-251-B80
AIR-LOGIC針閥F282240B80KSSV AIR-LOGIC過濾器F9705B80
AIR-LOGIC調壓閥R-7060222BWK AIR-LOGIC壓力開關F510060MM.1B
AIR-LOGIC節流孔F-2815系列介紹
模制節流孔是簡單的流量控制方法，也是 Air Logic 暢銷的產品系列之一。其工作原理是流量限制，節流孔直徑在零件編號中標識，并通過分配給每個節流孔尺寸的顏色代碼進行標識。除了節流孔直徑外，Air Logic 還控制許多影響節流孔總流量的較小因素。正因如此，Air Logic 的節流孔才得以在各種不同的市場中提供準確可靠的流量性能，并贏得客戶的信賴。所有 Air Logic 產品均在美國精密模制、組裝和測試。
Molded orifices are the simplest method of flow control and are one of Air Logic's best-selling product lines. They work on the principal of Flow Restriction with the orifice diameter being identified in the part number and by color codes assigned to each orifice size. In addition to orifice diameter, Air Logic controls many smaller factors that have an impact on the total restriction of the orifice. This is why Air Logic's orifices are trusted to provide accurate and reliable flow performance across a variety of different markets. All of the Air Logics products are precision molded, assembled and tested in America.
AIR-LOGIC針閥F282240系列介紹
塑料針閥是一種可調節的流量控制方式。針閥銷和閥體內部形成一個可調節的節流孔，用于限制流量。當無法確定確切流量或需要補償系統其他部件的流量變化時，這種閥非常實用。極細的螺紋確保調節精度。螺紋過盈會增加摩擦力，降低因振動導致流量變化的可能性。所有 Air Logics 產品均在美國組裝和測試。塑料針閥均經過密封性和性能測試。
Plastic Needle Valves are an adjustable method of flow control. Internally, the pin and body create an adjustable orifice that restricts flow. Useful for instances when the exact flow rate hasn't been determined or to compensate for flow variation in other parts of the system. Very fine threads ensure adjustment accuracy. Thread interference increase the friction and reduce the likelihood of vibrations causing a change in the flow rate. All of the Air Logics products are assembled and tested in America. Plastic needle valves are tested for sealing and performance.
AIR-LOGIC過濾器F970系列介紹
螺紋直列式過濾器可保護氣動或液體回路中的敏感設備免受系統污染。過濾器采用扁平不銹鋼編織結構，適用于小型設備或與系統級過濾系統協同工作的大型系統。直列式過濾器的流體方向不受限制，過濾器兩側的過濾面積和濾筒容積相等。螺紋直列式過濾器是 Air Logic 產品中過濾面積最大的過濾器。
螺紋直列式過濾器通常用于防止系統或設備內部產生的碎屑。例如，組裝過程中產生的聚四氟乙烯膠帶碎屑、閥門上破損的 O 形圈以及螺紋上的加工碎屑。
螺紋連接是一種便捷的連接方式，適用于各種應用。該產品可與 Air Logic 的接頭產品線結合，滿足特定應用需求，例如旋轉功能和可更換過濾器應用。
Threaded inline filters protect sensitive devices from system contamination in a pneumatic or liquid circuit. Filters are a flat stainless steel weave meant for small devices or for larger systems working in tandem with system-wide filtration. There is no flow orientation to the inline filters, the filtered area and canister volume are equal on both sides of the filter. Threaded inline filters offer the largest filtered area in Air Logic's offerings.
Threaded inline filters are commonly used to protect against debris generated inside of a system or device. Ex. Teflon tape debris during assembly, broken o-rings from valves, machining chips from threads.
Threaded connections are a convenient way to connect in a variety of applications. This product combines well with Air Logic's fitting product line for application specific requirements like swivel capability, and replaceable filter applications.
AIR-LOGIC調節器R7000系列介紹
模塊化超小型精密壓力調節器專為精確調節壓力而設計，是儀器儀表和工業應用的選擇。該壓力調節器具有20圈調節范圍，調節范圍為0.5至100 PSI。最大供壓為150 PSI。提供四種調節范圍：10 PSI、30 PSI、60 PSI和100 PSI。標準配置配備調節旋鈕，也可選擇加長1/4英寸軸以安裝調節旋鈕，或配備外露螺絲刀調節壓力范圍。
獨特的模塊化燕尾槽設計使該調節器可以單獨使用，也可以組裝成模塊化氣動元件組合。
The Modular Subminiature Precision Pressure Regulator is designed for precise regulation of pressure. It is ideal for instrumentation and industrial applications. The pressure regulator has a 20 turn adjustment range from 0.5 to 100 PSI. Maximum supply is 150 PSI. Four adjustment ranges are available: 10 PSI, 30 PSI, 60 PSI and 100 PSI. The standard device is furnished with an adjustment knob and is also available with an extended 1/4" shaft to accept an adjustment knob or furnished with an exposed screwdriver adjustment by which the pressure range can be adjusted.
The Unique Modular Dovetail design allows the regulator to be used individually or assembled into a modular combination of pneumatic components.
AIR-LOGIC壓力開關F5100系列介紹
標準壓力開關系列提供多種電氣額定值。15A 和 0.1A 是最常見的型號，通常交貨周期最短。建議使用 15A 型號直接控制大多數電流消耗設備。0.1A 型號的開關采用鍍金觸點，建議用于低電流應用，例如 PLC 和微控制接口。其他電氣選項可根據特定應用需求提供。
壓力開關將信號壓力施加到由彈簧力抵抗的隔膜上。當壓力信號力大于彈簧力時，達到設定點（也稱為“開啟"壓力），內部機構動作并改變電氣狀態。
當開關跳閘時，常開電路閉合，常閉電路斷開。開關將保持此狀態，直到壓力信號降至其復位點（也稱為“關閉"壓力）以下。
“開啟"壓力和“關閉"壓力之間的差值定義為開關的壓差或滯后。這對于壓力開關控制的壓縮機系統等應用而言是一項重要特性。例如，系統的能耗和容量以及開關的偏差將決定壓縮機的運行頻率。
可以通過拆下圓形蓋板并旋轉平頭螺釘來調整開關。順時針調整將提高設定點。逆時針調整將降低設定點（壓力）。不建議調整預設開關。請勿將上方的平頭螺釘旋出至與閥體齊平。
The standard pressure switch line with a variety of electrical ratings available. 15A and .1A are the most common versions and will typically have the shortest lead times. 15A is recommended for direct control of most current drawing devices. The .1A switch selection has gold plated contacts and is recommended for low amperage applications such as PLC and micro controlled interface. Other electrical options are available for specific application requirements.
Pressure switches apply signal pressure to a diaphragm that is opposed by a spring force. When then pressure signal force is greater than the spring force it reaches its set-point (also called “On" pressure), the internal mechanism moves and changes the electrical state.
When the switch trips, the normally open circuit closes and the normally closed circuit opens. The switch will remain in this state until the pressure signal drops below its reset point (also called “Off" pressure).
The difference between the “On" pressure and the “Off" pressure is defined as the Differential or Hysteresis of the switch. This is an important characteristic for applications such as pressure switch-controlled compressor systems. For instance, the consumption and capacity of the system along with the differential of the switch will determine how often the compressor runs.
Adjustments can be made to the switch by removing the round cover and turning the flat head screw. Clockwise adjustments will raise the Set point. Counter clockwise adjustments will lower the setpoint (on pressure). Adjusting preset switches is not recommended. Do not back out the flat head screw above flush with the body.
AIR-LOGIC常用產品型號：
AIR LOGIC F-2815-050-B80
AIR LOGIC F-2815-101-B80
AIR LOGIC F-2815-401-B80
AIR LOGIC F2815041
AIR LOGIC F2815041B80
AIR LOGIC F2815050
AIR LOGIC F2815050B80
AIR LOGIC F2815051
AIR LOGIC F2815051B80
AIR LOGIC F2815051PP
AIR LOGIC F2815071
AIR LOGIC F2815071B80
AIR LOGIC F2815101
AIR LOGIC F2815101B80
AIR LOGIC F2815121
AIR LOGIC F2815121B80
AIR LOGIC F2815141PC
AIR LOGIC F2815161
AIR LOGIC F2815161B80
AIR LOGIC F2815201
AIR LOGIC F2815201B80
AIR LOGIC F2815251
AIR LOGIC F2815251B80
AIR LOGIC F2815301
AIR LOGIC F2815301B80
AIR LOGIC F2815401
AIR LOGIC F282240B80KSSV
AIR LOGIC F282240B80KSSVWS
AIR LOGIC F282240B80KSSVWSE
AIR LOGIC F282240B80KSSVWSV
AIR LOGIC F282240B85KSSWS
AIR LOGIC F282240B85KSSWSE
AIR LOGIC F282240B85KSSWSV
AIR LOGIC F282240KSSWS
AIR LOGIC F282240KSSWSE
AIR LOGIC F282240KSSWSV
AIR LOGIC F282241B80KSSWS
AIR LOGIC F282241B80KSSWSE
AIR LOGIC F282241B80KSSWSV
AIR LOGIC F282241B85KSSWS
AIR-LOGIC F-2815-051-B80
AIR-LOGIC F-2815-071-B80
AIR-LOGIC F-2815-101-B80
AIR-LOGIC F-2815-161-B80
AIR-LOGIC F-2815-201-B80
AIR-LOGIC F-2815-251-B80
AIR-LOGIC F-2815-301-B80
AIR-LOGIC F-2815-401-B80
AIR-LOGIC F510030FM
AIR-LOGIC F510030FM.1B
AIR-LOGIC F510030FM10A
AIR-LOGIC F510030FM25A
AIR-LOGIC F510030FM3A
AIR-LOGIC F510030FM5A
AIR-LOGIC F510030FMB85.1B
AIR-LOGIC F510030FMB853A
AIR-LOGIC R-7060-0B0B-W/K
AIR-LOGIC R-7060-0B0B-W/S
AIR-LOGIC R-7060-0B0B-WO/S
AIR-LOGIC R-7060-0G0B-W/K
AIR-LOGIC R-7060-0G0B-W/S
AIR-LOGIC R-7060-0G0B-WO/S
AIR-LOGIC R-7060-0H0B-W/K
AIR-LOGIC R-7060-0H0B-W/S
AIR-LOGIC R-7060-0H0B-WO/S
AIR-LOGIC R-7060-0I0B-W/K
AIR-LOGIC R-7060-0I0B-W/S
AIR-LOGIC R-7060-0I0B-WO/S
AIR-LOGIC R-7060-0J0B-W/K
AIR-LOGIC R-7060-0J0B-W/S
AIR-LOGIC R-7060-0J0B-WO/S
AIR-LOGIC R-7060-1B1B-W/K
AIR-LOGIC R-7060-1B1B-W/S
AIR-LOGIC R-7060-1B1B-WO/S
AIR-LOGIC R-7060-1G1B-W/K
AIR-LOGIC R-7060-1G1B-W/S
AIR-LPGIC F97043
AIR-LPGIC F97043B80
AIR-LPGIC F97043B85
AIR-LPGIC F97043B86
AIR-LPGIC F97043P80
AIR-LPGIC F97043P85
如果您需要完整的AIR-LOGIC的相關技術咨詢，請隨時致電愛澤工業，或者訪問網站，我們將盡全力解決您的問題。
If you have any question for AIR-LOGIC，Please feel free to communicate with us and we will do our best to solve your problem.
